The mountain rider’s preferred weapon of choice
The Duke Crazy Jack SLS2 6TERS rear rim is a concentration of innovative technologies. It will let you, as you prefer, swallow up the bumps or hit the descents. A true All-Mountain/Enduro rim that is versatile, ultra strong, rigid and relatively comfortable.
A rear wheel has to be comfortable, strong and has to offer more efficiency. For these reasons this rim has seen a lot of optimization and reinforcements. Thanks to its internally 27mm wide profile it can be used on all terrain types.
Features
- 100% made from Carbon
- Tubeless Ready
- asymmetric (Offset) Profile
- designed, developed and tested in Europe
- hookless rim
- Offset: 2.8mm
Technologies & Features
Hookless Rim
This type of rim is far stronger than the traditional clincher rim. Duke has used this technology with great success, on their rims since 2011
Burp-Free System
The bead of the tyre is held in position irrespective of the tyre pressure and the ground conditions, preventing any risk of the tyre coming off its rim even when giving it full gas in the corners.
Asymmetric Profile
By offsetting, DUKE was able to increase the potential lateral wheel strength and its stability without adding weight. Rim drillings are off-centre to improve bracing angles for a stronger, more rigid wheel.
6TERS
The Duke 6TERS concept offers a narrower rear rim than the front rim for more grip and stiffness. Its robustness is prefered instead of low weight. The rear profile is reworked with a reduced section, with an additionally carbon fiber layer to improve compliance and increase the impact resistance.
Wide inner rim
A wider profile rim increases the comfort, for the rider, compared to a similar width tyre mounted on a narrow "standard" rim because of the increased air volume in the tyre.
Tubeless Ready
The Tubeless compatible rims by Duke (UST, Tubeless Ready and Notubes), only require some Duke rim tape and a Tubeless-ready valve. They can also be used in a classic clincher set up (tyre & inner tube).
SLS (Super Light Series)
These rims are 10% lighter than classic version, while maintaining exactly the same strength and stiffness. They manufactured in a sealed atmosphere and requires no retouching at the exit of the mold. No sanding or varnishing, the finish is exceptional!
Maximum system weight: 110 kg!Included in delivery: 1 rim
Material: Carbon
Weight supplement: manufacturer information
