Mudhugger EVO Zip-Tie Shorty Front Fender

The Mudhugger EVO Zip-Tie was introduced in 2021 and developed with the help of riders from the DH World Cup and EWS. It was designed based on the current FOX 36/38 and RockShox ZEB models to address the problem of collision between the fender and fork crown at full compression, which many other fenders have. It is also stiffer and offers more tire clearance than the original design. It is stable enough for DH use at the highest level. The short version of the EVO Bolt-On is optimized to make the fender just long enough to provide the best protection in all but the most extreme conditions. In return, it offers better torsional rigidity. A slightly implied spoiler improves splash protection. The rear length is 255 mm, the front 105 mm.

The Mudhugger Zip-Tie is compatible with most suspension forks, but in some cases requires minor modifications. For example, to mount the EVO on a Manitou Mezza or comparable models with reverse arch (rear bridge), four small holes must be drilled to allow attachment to the bridge. Please note the compatibility chart and contact us in case of doubt if the fork you are looking for is not yet listed.

Although the attachment with cable ties is ideal for permanent mounting, it is also possible to mount the fender by means of an, optionally available, Velcro fitting kit to be able to easily off and on. This also saves a little bit of plastic waste.

Features of the Mudhugger EVO Zip Tie Shorty front mudguard

• made from recycled polypropylene
• suitable for wheel sizes: 26" 27,5" 29"
• Application: Downhill, Crosscountry, Enduro, Trail
• mounting position: front
• Item weight: 100 g (without mounting)
• Length: 390 mm
• Wheel guard length front: 105 mm, rear: 255 mm

Is the Mudhugger EVO Zip-Tie compatible with your fork?

Please note the Mudhugger EVO compatibility chart, you can find this on one of the photos.

This overview should help to find the right EVO fender, suitable for the suspension fork. Some fork models require additional parts or minor modifications to the fender to fit.

Please note:

• Minimum fork pre-bend (offset) for all EVO mudguards: 44 mm.
• x - means not compatible.
• ✓ - means compatible, please note additional instructions.
• Velcro fitting kits are available separately.
• ✓* - means heating of the mudguard is necessary to widen the wings a bit - we recommend to put the mudguard in hot water.

Scope of delivery

• Front mudguard incl. 4x cable ties