Wheels Manufacturing Extractor Kit | EssentialKit - Removal Tool Set for Sealed Bearings - EX0002 | Medium

The Bearing Extractor Essential Kit is an indispensable tool for the professional bicycle workshop. The tool sets of the Essential series contain everything it takes to to get a specific job done correctly.

The EX0002 tool set can be used to remove sealed bearings with a medium inner diameter of 15, 17, 20 and 25 mm. The included extractors attach to the inner ring of the bearing and allow it to be pulled out of the hub shell or frame component.

Use: After inserting the extractor into the bearing, one side is tightened with a matching wrench. In the process, the collet expands to grip the inside of the bearing. Finally, the extractor and the bearing must be tapped out together with a punch and hammer.

Scope of supply:

4 extractors:
6002 (for 15 mm inner bearing diameter),
6003 (for 17 mm inner bearing diameter),
6804 (for 20 mm inner bearing diameter),
6805 (for 25 mm inner bearing diameter)

1 replacement bolt set

Notes: All extractors are size specific. If the removal tool is smaller than the bearing, it is recommended to use a washer between the extractor and the bearing to achieve the tightest fit possible before tightening the bolt.