Ordered by 3 pm on weekdays – shipped the same day8
Более 800 брэндов
800.000 active customers
SRAM

SRAM Rival 1 Hydraulic Brake Lever + Hydraulic Disc Brake - Flat Mount - left | front - black

SRAM Rival 1 Hydraulic Brake Lever + Hydraulic Disc Brake - Flat Mount - left | front - black

The Definition of Road is Changing. Paved or not. Cyclocross or triathlon. Crit racing or uncharted journeys. SRAM Rival 1 provides the tools and technology to meet each challenge. All with a single X-SYNC™ chainring, matched to our dedicated SRAM 1x™ drivetrain. 1x for the new era of road rider can provide a simpler, lighter and more durable solution.

SRAM Rival 1 Hydraulic Brake Lever + Hydraulic Disc Brake - Flat Mount

  • All new design inside and out
  • Revised ergonomics for better finger wrap and a revised shifter paddle for improved finger clearance
  • Individual Reach Adjust
  • Forged Aluminum brake & shift levers
  • Low hand force required
  • Fully sealed system for no contamination
  • Easy bleed access
  • Use this 11-speed shifter for both SRAM Road 1x and 2x drivetrains
  • Optimized stopping power and modulation for road or cyclocross
  • 18mm front/18mm rear pistons
  • Road specific caliper and piston ratio
  • Centerline rotors sold separately
  • Forged aluminum disc caliper with Steel-backed organic pads
  • Now available to fit flat mount frames and forks


DOT 5.1™

Heat is an enemy of any brake system, so advancements in heat management, mean advancements in your ride. You see, SRAM found that in their systems DOT 5.1 takes almost 3 times longer to boil than DOT 4, thus allowing flawless fade-free performance in even more extreme conditions.

DoubleTap

What It Is: DoubleTap® is the flagship technology leading SRAM's road gruppo revolution. It's a simple yet elegant and advanced system that addresses issues - Without compromising on performance, comfort, and weight - with a revolutionary shift/brake lever design.

What It Does: DoubleTap® makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars.

How It Works: DoubleTap® uses two pawls, one for holding the ratchet wheel, and one for transporting it up and down through the gear change. The pawls are arranged in a way so that they can leapfrog each other depending on how far, and with how much pressure, you push the shift lever. With short, rapid taps the transport pawl (04) moves the ratchet wheel (02) up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximized 15° angle) with the holding pawl (03) and the transport pawl leapfrogging each other quickly and smoothly.

Location, Location, Location: DoubleTap's one-motion unidirectional levers (05) work flawlessly no matter what position you're shifting from. Its double-articulated design (01), which is completely separate from the brake pivot, is easily engaged from the hoods or the drops.

Unlike all other forward controls, DoubleTap® also lets you pull the shift lever in against the bars so you can upshift while sprinting or attacking without giving up a firm grip.

Divide and Conquer: On DoubleTap® controls, the brake and shift levers are completely independent, each operating with their own pivot points. This not only allows for the multiposition functionality, it also eliminates the risk of engaging brakes or shifters unintentionally - an unfortunate side effect of other shift/brake lever designs.

What It Means To You: The efficient and ergonomic design reduces weight and eliminates bulk while adding comfort. You can shift from any position on the bars, even while sprinting, giving you a critical advantage over your competition, and our new single-lever mechanism also lets you shift faster, easier, and with more accuracy, without risk of scrubbing speed or losing your grip. DoubleTap® is the cornerstone of SRAM's assault on road biking. It's a new way of shifting - and a new way of thinking - that will put you ahead of the competition, no matter where you find it.

ErgoDynamics™

It consists of three separate elements to significantly improve your riding experience on SRAM DoubleTap controls. The brake lever is slightly longer than previous DoubleTap road controls to enhance the reach from the drops. The independent reach adjust features on the brake and shift levers are easier to access to quickly adjust for every hand size. Finally, the shape of the hoods has been completely redesigned with a smaller diameter and higher top shape to increase the rider's control and improve finger wrap.

EXACT ACTUATION™

When SRAM launched their road technology from scratch they reapplied the MTB proven SRAM 1:1 actuation ratio (shifter cable travel : derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilize the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.

Reach Adjust

Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.

Yaw™

The front derailleur cage rotates to maintain a consistent angular relationship with the chain. Yaw technology eliminates the need for shifter trim. As a result, shifts feel more direct, more precise, and combined with the new Red crankset and chainrings, delivers an unmatched performance advantage in front shifting.

ZeroLoss™

ZeroLoss simply means, well, zero loss-when you push on the lever, for an upshift or down shift, the cable is engaged instantly-zero loss of movement. There is no middle-ground where you're waiting for the shift to come. Gear changes are instant and precise.
Brake caliper: Flat Mount
Brake fluid: DOT 5.1
Brake hose: 950mm
Brake lever: left
Braking pads: organic
Disc: brake disc not included in delivery!
Included in delivery: hydraulic brake lever, brake hose 950mm, front brake caliper, FW adaptor
without brake disc

Manufacturer item code: 00.5018.059.002
Material: Brake and shift lever / brake caliper: aluminiumy
hardware: stainless steel
Weight supplement: Hydraulic Lever, brake hose, brake caliper, FW adaptor)
(weighed by Bike24

Характеристики SRAM Rival 1 Hydraulic Brake Lever + Hydraulic Disc Brake - Flat Mount - left | front - black

Product name: SRAM Rival 1 Hydraulic Brake Lever + Hydraulic Disc Brake - Flat Mount - left | front - black
Manufacturer: SRAM
Item code: SRA269356
Activity: Cycling
Material: Aluminium
Usage bikesport: Road Bike
Disc brake mount: Flatmount
Brake actuation: Hydraulic
Brake lever version: Drop bar
Brake fluid: DOT 5.1
Disc brake - version: # Front Wheel, Set caliper & lever
Model year: 2023
Color: Black
Weight: 335g
Manufacturer page: www.sram.com