bike ahead composites THE UNIT ICR Handlebar-Stem-Unit

Take the design language of your bike to the next level. The Unit ICR becomes one with your bike.

ICR stands for internal cable routing. This means that with our new THE UNIT ICR you have the opportunity to get the mess on your cockpit under control. All cables disappear elegantly on the underside of the handlebars. Your gaze can now wander unhindered over your new eye-catcher made in Germany and the trail in front of you.

The lines of the stem flow into the head tube just as clearly as the look of the handlebars. As a link, bike ahead composites has developed a sealed top cover for 52 mm (ICR) and 42 mm bearings that is compatible with ACROS bearings.

bike ahead composites has gathered experience from its established handlebars and stem combinations. Despite the openings for cable entries and the approval for e-bikes up to ASTM 4, they were able to reduce the weight by almost 10% compared to the predecessor.

Features of the bike ahead composites UNIT ICR handlebar/stem unit

• approved for enduro bikes (including e-bikes) up to ASTM4 with a maximum rider weight of 130 kg (rider + luggage)
• from a light 199 g at 800 mm width, can be shortened to 740 mm
• ICR - internally routed cables - cable inlets on both sides 80 mm from the center for 2 cables each
• Visually integrated top cover and spacer for cable routing
• Compatible with IS52 mm ACROS bearings
• Fitting clamping area with patented NO SLIP APPLICATION surface 230 mm wide when not shortened
• elegantly integrated A-Head cap
• Stem clamp 35 mm high with 2x M5 titanium T25 bolts
• separately available GPS mount with only 9 g additional weight
• Separately available spacer / top cover set in 3 variants for perfect transition to the headset
• Also compatible with IS42 mm bearings(without ICR)
• Made in Germany

Technical data of the THE UNIT ICR handlebar-stem unit

• BEND TO THE REAR: 9.5°
• WEIGHT: 44 mm: 199 g | 55 mm: 205 g | 66 mm: 208 g | 77 mm: 210 g
• WIDTH: 800 mm
• HEIGHT: 44 mm: 15 mm | 55, 66, 77 mm: 0 mm
• STEM ANGLE: 44 mm: 0° | 55 mm: -4° | 66 mm: -8° | 77 mm: -10°

Made in Germany

Perfect craftsmanship guarantees a great product. BIKE AHEAD COMPOSITES is committed to manufacturing all products carefully, cleanly and fairly with the Made in Germany label.

All production steps take place in-house, from the idea to the series product. This enables us to monitor the overall quality and manufacture safe products. In line with our philosophy of "functional lightweight construction", we know our products down to every single carbon fiber.