ORTLIEB Seat-Pack QR Saddle Bag - 7.5L - dark sand

Whether you're tackling a single trail, Alpine pass, or gravel route, the waterproof Seat-Pack QR has you covered for any cycling adventure. With its innovative and patented Seat-Lock mounting system, this bag made of abrasion-resistant nylon fabric is super stable, quick to install, and just as quick and easy to remove without leaving any residue. Thanks to the adapter clamp, the Seat-Pack QR is even suitable for dropper seatposts and requires only 4.3 cm of space on the dropper post. The internal stiffener and five compression straps ensure that the content is securely and tightly packed. A valve with a handle loop helps to compress the pack volume, and the elastic cord on the outside allows additional equipment to be attached. To prevent damage from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also serves as a fender replacement.

Features of the ORTLIEB Seat-Pack QR saddle bag - 7.5 L:

• Waterproof saddle bag with roll closure
• Seat-Lock fastening system for quick mounting
• Bag with 3D protective plate on the bottom and compression straps; the bag is highly compressible yet comparatively lightweight,
  despite very good fixation of the content
• Compatible with standard seat posts up to 35 mm diameter
• Compatible with dropper seatposts with 22, 25, and 26 mm seat tube diameters thanks to additional adapter clamp (height: 4.3 cm)
• Ideal for bikepacking, touring, or day trips
• Mounting via QR lever on the saddle rails and via strong hook-and-loop fastener
• Lightweight, robust PU-coated nylon fabric
• Valve with handle loop for compressing the pack volume
• A 3D protective plate on the underside provides stability and prevents damage from tire contact
• Can be removed without leaving any residue
• Daisy chain for attaching a rear light or other equipment
• 3M Scotchlite reflectors
• Maximum load capacity 3 to 5 kg depending on the position of the hooks
• For installation, the seatpost must protrude at least 4.5 cm from the frame

Compatibility note

You can easily check whether your saddle is suitable:

• The saddle frame must have a minimum angle of 34° at the bend
• Measured from the bend, you need at least 13 mm of space along the saddle frame between the saddle clamp and the underside of the saddle
• The lower edge of your saddle must be at least 14 mm higher than the lower edge of the saddle frame (measured at the bend).

Unfortunately, the following components are not suitable:

• Carbon saddles
• Suspension seatposts
• Saddles with unusual saddle frames, e.g., SQLab Active, Brooks B67
• Electronic dropper seatposts, e.g., Rock Shox Reverb AXS or Magura Vyron
• If you still have problems during initial installation, make sure that the Seat Lock System on the bag is moved as far forward as possible (towards the seatpost) and that the four locking screws of the Seat Lock System are loosened. This is the easiest way to install the bag and find a suitable position.

scope of delivery:

• Saddle bag with Seat Lock mounting system, adapter clamp for dropper seatposts